Environmental Steel Plate Silo Equipment Suppliers_Environmental Steel Plate Silo Equipment Suppliers Company

Floor-standing Steel Plate Silo is widely used in the field of material storage and transfer with its features of large capacity, high land utilization, high automation, short construction period and low investment per unit volume.

 

The material pressure is evenly distributed on the steel plate warehouse floor, the pressure is transferred to the earth through the floor of the warehouse to realize the pre-pressure bearing, which can meet the requirements of different foundation bearing capacity, and the filler on the floor of the warehouse is lightweight pressure-resistant material; there is a fluidization device on the filler on the floor of the warehouse, and each set of this fluidization device is an independent unit, and it can be realized that the periphery of the fluidization device can be replaced by the material with the material. Floor to ceiling steel plate warehouse small gas consumption: because the warehouse adopts the gas fluidization unloading, gas homogenization, gas out of the warehouse conveying the integration of the design concept of environmentally friendly steel plate warehouse, i.e., a gas multi-purpose principle spiral steel plate warehouse, you can save a lot of gas source.

Assembly silo wall plate into corrugated, the plate is generally used galvanized sheet, its thickness is usually 0.8 ~ 4.2 mm, the current silo wall thickness can reach 8.4 mm. most of the corrugated wall plate using the roller pressing process, by the mechanical molding production line into mass production, the production line can be fully automated to produce a variety of specifications of the corrugated plate. The advantage of the roll pressing method is that the wave shape is formed one by one, the internal stress can be eliminated, the resilience is small, and the quality of the plate produced is better, even if the thicker steel plate can be formed in the molding unit assembly line according to the sequence of one-time molding. In addition, the molding unit and the uncoiler, leveler, conveyor roller conveyor and hydraulic fixed-foot flying shear and other ancillary equipment can be directly to the coil into the required specifications of the corrugated steel sheet products.

 

Large steel plate warehouse civil construction, the site has engineering and construction conditions, according to the drawings will begin to release the line steel plate warehouse manufacturers, earth excavation, according to the coordinates of the construction drawings to set a good center position of the large steel plate warehouse circle, put out the need to excavate the side line, sprinkle white ash as a mark, excavation of earth and stone is along the sprinkled line of white lime for excavation. When excavating the earth and stone, the level meter is used to measure and control the elevation of the excavated earth, and the mechanical excavation is done to the design elevation of 300-500mm, and the rest of the excavated earth is cleaned up manually so as not to disturb the soil structure of the lower layer by the mechanical excavation.