Home> Industry News> Features of welded steel plate silos and reasons for their popularity

Features of welded steel plate silos and reasons for their popularity

December 23, 2024
Advantages of welded Steel Plate Silo.
 
1. The homogenisation and discharge system consumes little gas. As the silo adopts the design concept of integrating gas fluidisation, gas homogenisation and gas discharge and conveying, i.e. the principle of multi-purpose of one gas, a large amount of gas source can be saved. High pressure air is used as the gas source due to the consideration of the long storage period of cement and the increase of capacity and weight. The comprehensive power consumption of air homogenisation, unloading and conveying of ton of cement is about 0.3 degrees, and the power consumption will be relatively increased if the cement is stored for a long time.
 
2. Good effect of material storage. Due to the good sealing performance of welded steel plate warehouse, the stored cement, fly ash, sand, gravel, aggregate, etc. are in tight air isolation, the material is in a vacuum sealing state, to ensure that the characteristics of the material does not change.
 
Welded Steel Plate Silo
3. Low carbon and environmental protection. The top of the steel plate silo is a load-bearing dome, and a pulse vibration dust collector is set at the top of each silo, which mainly collects the dust generated when the materials are put into storage, so that the concentration of the dust emission reaches 30mg/m or less.
 
4. Flexible process layout. According to the actual situation of the site, a variety of forms of layout, the direction of the discharge corridor, the choice of lifting equipment, etc. can be determined according to the actual situation of the site. The layout of welded steel plate silo is free and flexible, which can meet the various needs of customers.
 
5. Wide range of storage and application. Welded steel plate silo can be used to store cement, clinker, slag powder, fly ash, sand, aggregate and other industrial bulk materials. Widely used in cement factory, thermal power plant, iron and steel plant, mining and other industries.
 
6. Short construction period and long service life. According to different geological conditions, site environment and capacity, the construction cycle is usually different, while the general construction cycle of welded steel plate warehouse is about 4 months, and its service life can be up to 30-50 years.
 
7. Low maintenance cost. Welded steel plate warehouse discharge equipment almost no maintenance costs. If the anti-corrosion maintenance according to the specification, every few years only need to brush the duty paint, can ensure a reliable service life of 30 years, no obvious corrosion on the outside, save maintenance and protection costs.
 
Warehouse Type Diversified Finished Goods Warehouse and Distribution
What are the reasons for the popularity of welded steel plate warehouse?
 
1, a good cement steel plate warehouse should have a reasonable occupancy storage ratio:A good cement steel plate warehouse should firstly store more cement in the occupancy rate, save land resources, so that the cement steel plate warehouse has more storage capacity under reasonable space conditions.
 
2, good cement steel plate warehouse material advantage: good cement steel plate warehouse with building materials is certainly good building materials. Good building materials can always extend the service life of the cement steel plate warehouse, in addition to the long service life, long-term storage of cement will also corrode the warehouse. Good building materials corrosion resistance, reducing the frequency of replacement of steel plate warehouse, reducing our costs.
 
3, good welding technology:Good cement steel plate warehouse has the advantage of good materials. Its welding technology is also good, better welding technology can greatly reduce the installation time of the steel plate warehouse.
 
Storage capacity time-based finished goods warehouse and issuance
Anyang Dazheng Steel Silo Co., Ltd., founded in 2002 with a registered capital of 35.89 million RMB, is a large-scale specialized manufacturer and contractor of steel silos, steel structures, and grain machinery. The company has obtained international certifications for quality, environmental management, and occupational health and safety. It holds 3 invention patents and 54 utility model patents.
 
The annual production capacity of Dazheng Company is over 2 million cubic meters of steel silos and 36,000 tons of steel structures. The diameter of the steel silos can range from 2.8 meters to 30 meters. Single silo storage capacity reaches 20,000 tons. The height of multi-layer steel structure frameworks can reach 50 meters.
 
Dazheng has undertaken international projects in countries such as Malaysia, Vietnam, Kenya, South Africa, Eritrea, Russia, Kazakhstan, and Kyrgyzstan, establishing long-term stable cooperative relationships.
 
factory
Contact Us

Author:

Mr. Da Zheng

E-mail:

dzgbc@163.com

Phone/WhatsApp:

+86 18603720479

Popular Products
You may also like
Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send